Air Hose Reel 3/8 in x 25 ft Wall Mount Retractable 300 PSI Hybrid Hose P15964
3/8"x 25FT Premium Heavy-Duty Retractable Air Hose Reel The REEL8 of Air Hose Reel pairs with your air compressor to eliminate tangled air hoses and reduces clutter in your shop or garage. The Easyuse Air Hose Reel pairs with your air compressor to eliminate tangled air hoses and reduce clutter in your shop or garage. The air hose reel allows you to manage 25 feet of hose. Steel construction for a secure mounting to the wall. Auto Rewind retractable ratchet action allows you to release as much hose as needed. The hose will remain securely in place until you reel it back. Hybrid and retractable air hose with maximum air pressure: 300 PSI Air inlet (female): 3/8 NPT Air outlet (male): 3/8 NPT Product Dimensions: 11.0 inch long, 4.8 inch wide and 12.0 inch high Hose Temp Rating: -4°F ( -20°C) to the highest of 140°F (60°C) Installation of Reel 1. Make a paper template modeled after the one above. 2 The Reel may be installed on the wall, floor, or ceiling (at least ten feet above the floor). 3. Remove the bolts that attach the guide roller bracket to the support post to re-position the bracket for the appropriate location. Replace bolts and tighten. 4. Drill holes [o accommodate 1/2 inch bolts (not included). Make sure you are drilling into a solid backing, or use the appropriate hardware o anchor in the bolts. 5. Mount reel and secure the four bolts (not included) through the 1/2" holes in the bracket. Adjustment of Spring Tension 1. Pull out six feet of hose 2. To increase tension, wrap the pulled hose one time around the drum. 3. To decrease tension, unwrap the hose one time from the drum. 4. Run the hose back through the guide and re- attach the hose stopper.